| |
| |
 Finally,
there's a way to protect children from
the dual hazards of heat and fire from
fireplaces, wood burning stoves and
barbecues, as well as the dangerous
corners and hard, rough surfaces associated
with hearths.
The HearthGate? is the solution for
layouts that do not have mounting points
straight across. The standard gate fits
hearths 6' wide by 2' deep. Larger fireplaces
and wood burning stove areas may require
additional sections.
Five interlocking sections adjust
in 10° increments and can be angled
or set in a straight line as needed.
Included in the 5 piece basic set
is a walk through section that opens
in either direction with a simple
one hand adult release.
The HearthGate is 29½"
high and constructed of strong
tubular steel with a black, non-toxic,
heat resistant finish that is easy
to maintain and blends with any decor.
This
gate comes with hardware to mount
it on any solid surface. You need
additional Installation kit(s) if
you mount the gate on other surfaces
- see below
If
White finish is desired, the ConfigureGate
can be substituted by clicking here
|
|
G70 |
The
Hearthgate
|
Regular
Price $219.99
Our
Price - $184.95
FREE
SHIPPING
|
|
|
| Optional
Extension Kits |
G70-8 |
8"
Optional Extension
|
Regular
Price $39.99
Our
Price - $27.95 |
|
G70-24
|
24"
Optional Extension
|
Regular
Price $49.99
Our Price $36.99 |
|
|
| Safety
Gate Installation Kit Model K100
Required
for the safe installation of almost
any safety gate that is not being
mounted in a wooden doorway frame.
This kit includes the materials
and fasteners necessary to install
the gate to wood banisters, hollow
walls, or wrought iron. More than
one kit may be necessary, as in
the case of wrought iron.
KidCo
has assembled the materials and fasteners
necessary to properly install any
child safety gate to wood banisters,
hollow wall (drywall) or wrought iron.
The KidCo Gate Installation Kit can
save several trips to the lumber yard
and hardware store. When mounting
the gates to unusual surfaces such
as brick or concrete, KidCo recommends
that you consult a hardware professional,
baby shop or baby proofing specialist.
One
kit is required for each side of
the gate that is not being mounted
into a solid vertical wood surface
and only the most basic tools are
needed to assemble any good child
safety gate.
Pictures
show the following types of installations:
|
|
|
|
|
|
|
|
|
|
|
|
|
